Permit Requirements for Wetmore, Colorado
For Plumbing projects in Wetmore, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Custer County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General Plumbing Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.
Because Wetmore is located within Custer County, the following broader county regulations may also apply to your project:
Colorado, Custer County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Custer County Plumbing Permit Requirements
Custer County, Colorado, requires permits for new construction involving plumbing, which includes both water and propane systems. These permits are governed by the State of Colorado's Electrical and Plumbing Codes. While Custer County has not adopted a comprehensive building code, it does enforce state electrical, plumbing, and septic codes. Plumbing and electrical permits must be obtained from the state, and inspections will be conducted by state inspectors. Septic systems are inspected by county inspectors.
For properties in unincorporated areas, a zoning permit is required for any structure, including foundations, additions, or moved buildings, before excavation begins. A permit for a sewage disposal system or modification must also be submitted prior to the acceptance of a zoning permit application. The county's Planning and Zoning Office handles these permits.
Key requirements and considerations include:
- State Permits: New construction with plumbing or electricity necessitates a State permit obtained from the Colorado State Plumbing Board or the local building department.
- Zoning Permit: Required for all structures in unincorporated areas before any construction work commences.
- Sewage Disposal: A permit for a sewage disposal system or modification is required before a zoning permit application can be accepted.
- Compliance Inspection: A final compliance inspection is required, which will confirm that the structure, water, plumbing, electric, and septic systems are in compliance with the Custer County Zoning Resolution and relevant state codes.
- Fees: Permit fees are applicable and vary based on the project's scope. For zoning permits, costs are calculated per square foot of the structure.
- Property Suitability: It is crucial to verify with the Custer County Planning and Zoning Office whether a specific piece of land is legally buildable, as not all parcels may be suitable for construction.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Colorado:
Colorado Plumbing Legislation, Codes, and Guidelines
State-Level Plumbing Codes in Colorado
The State of Colorado establishes minimum standards for plumbing installations through the Colorado Plumbing Code. This code is primarily based on the 2021 editions of the International Plumbing Code (IPC), the International Fuel Gas Code (IFGC), and the plumbing provisions of the International Residential Code (IRC). The state adopts these model codes with specific state-level additions, revisions, and deletions, which are codified in the Code of Colorado Regulations (3 CCR 720-1).
Regulatory Authority
The primary agency responsible for setting and enforcing these standards is the Colorado State Plumbing Board, which operates under the Department of Regulatory Agencies (DORA). The Board is responsible for licensing plumbers, registering apprentices and contractors, issuing permits for state-inspected areas, and conducting inspections to ensure compliance with the state-adopted codes. While the state sets these minimum standards, local jurisdictions may also adopt and enforce their own building codes, which can sometimes be more stringent than the state requirements.
Resources to Learn More